The internet connection is still lagging! Does your router show only one bar? Despite your best efforts, the connection leaves something to be desired. It is also possible that the house itself obstructs the waves or that interference disturbs the signal of your box or your Wi-Fi router. Do you seriously need to amplify the signal? Don’t panic! The solution exists! A WI-Fi repeater, made from recovery objects. The result will leave you speechless!
Here’s how to proceed: a diagnosis, tests, an hour of your time and it will be settled!
Are you sure you’ve done everything you can to optimize your Wi-Fi connection?
If this is the case and the problem persists: several solutions exist. The first is to buy a Wi-Fi repeater. It will serve as a relay. The second is to pass the WI-Fi through your electrical network, thanks to PLC sockets (powerline on power lines). The experience is satisfactory if your electrical installation is reliable.
Read also: Put a sock full of cat litter in the car: the awesome trick that saves
Increasing signal range is possible, thanks to a homemade Wi-Fi repeater
Known as the “Ricoré” Wi-Fi repeater, named after the famous hot drink, this trick amplifies the signal by retrieving the box containing the soluble coffee. If you have managed to achieve Objects with your hangers, or by recovering other materials, it will be easy for you! This homemade directional antenna at a reduced cost will take you an average of an hour, a box, a CD and a few cables.
A Wi-Fi extender studied, tested and “approved”.
This homemade solution seems unserious to you: think again, the repeater “Ricoré” has managed to prove itself. On YouTube channels, everyone has their own comments. Note that the size of the box is important. Budding physicists have measured, calculated, catalogued and published everything on the net. This homemade repeater will be able to “multiply” the power of your router.
What you need to achieve at your home Wi-Fi extender repeater
To achieve this, here’s what you’ll need:
- A CD;
- A USB Wi-Fi adapter;
- A can “Ricoré”, preferably large;
- A classic tripod for laptop;
- A pan lid that goes to the oven;
- Different materials: screws, strong glue, tools for drilling, cutting and gluing.
Take all your precautions to make your repeater. It is possible that you will burn or cut yourself, not to mention the problems that could cause the use of strong glue. Also know that Waves can be a problem to certain family members.
Step 1: Prepare the bottom of the amplifier
The CD must be heated for it to take shape. It will bend heated in the oven. Use the lid or the dish, the grid is not enough. No preheating, otherwise the CD can be damaged, the film will peel off.
Having immediately removed the CD from the oven, press its center with a heat-resistant object, to give it a parabolic shape and then let it cool.
Step 2: Assembly the amplifier with the CD and can
Step 3: Connect the case to your router
The Wi-Fi adapter plug is pressed into the hole in the CD. Plug it into the Wi-Fi cable output of your computer. Finally, install everything on the tripod so that it acts as a support.
Read also: What to throw away before the New Year? 5 things to leave behind to start the year off to a good start
As you will see, the signal is now excellent and your Wi-Fi extender obviously has something to do with it! A little of your time, recycled materials, ingenuity and voila. With as a bonus, the pride of having managed alone!
Read also: What are the lace tips used for? Discover their true function